Version 0.16, September 08, 2013
Albert Graef <aggraef@gmail.com>
This is a Pd loader plugin for the Pure programming language which lets you write external Pd objects in Pure.
Please note that the present version of the module is still somewhat experimental, but it seems to work fairly well at least with Pure versions 0.34 and later. In particular, note that Pure is a compiled language and thus there are some inevitable latencies at startup, when the embedded Pure interpreter loads your Pure scripts and compiles them on the fly. However, once the scripts have been compiled, they are executed very efficiently. As of pd-pure 0.15, it is also possible to precompile a collection of Pure objects to a library in binary format which can be loaded much faster with Pd’s -lib option. (This requires Pure 0.50 or later.)
Copyright (c) 2009-2011 by Albert Graef. pd-pure is distributed under a 3-clause BSD-style license, please see the included COPYING file for details.
MS Windows users please see pd-pure on Windows below.
Get the latest source from https://bitbucket.org/purelang/pure-lang/downloads/pd-pure-0.16.tar.gz.
Usually, make && sudo make install should do the trick. This will compile the external (you need to have GNU make, Pd and Pure installed to do that) and install it in the lib/pd/extra/pure directory.
The Makefile tries to guess the installation prefix under which Pd is installed. If it guesses wrong, you can tell it the right prefix with make prefix=/some/path. Or you can specify the exact path of the lib/pd directory with make pdlibdir=/some/path; by default the Makefile assumes $(prefix)/lib/pd.
It is also possible to specify an alternative flavour of Pd when building and installing the module, by adding a definition like PD=pd-extended to the make command line. This is known to work with pd-extended and pd-l2ork, two popular alternative Pd distributions available on the web.
The Makefile also tries to guess the host system type and Pure version, and set up some platform-specific things accordingly. If this doesn’t work for your system then you’ll have to edit the Makefile accordingly.
There’s a binary package in MSI format available at the Pure website: https://bitbucket.org/purelang/pure-lang/downloads/pd-pure-0.16.msi. Use that if you can. You’ll also need the latest Pure version (0.50 at the time of this writing), and Pd 0.43 or later, which is available from Miller Puckette’s website: http://crca.ucsd.edu/~msp/software.html.
After installation, you still have to tell Pd to load the Pure external at startup, either with the -lib option (pd -lib pure), or by specifying pure in the File/Startup options (Media/Preferences/Startup in Pd 0.43 and later). This setting can be saved so that the Pure loader is always available when you run Pd. Once the Pure loader has been installed, you should see a message in the Pd main window indicating that the external has been loaded.
Since version 0.12 pd-pure supports the definition of both control and audio objects in Pure. The latter are also known as “tilde objects” in Pd parlance; pd-pure follows the Pd convention in that audio objects have a trailing tilde in their name. Audio objects are used primarily for processing audio signals, whereas control objects are employed for asynchronous message processing.
Simple “one-off” control objects can be created with the [pure] class which takes the function to be evaluated as its argument. For instance:
[pure (+5)]
This object takes numbers as inputs on its single inlet, adds 5 to them and outputs the result on its single outlet.
Similarly, audio objects can be created with [pure~]. For instance, the following object processes incoming vectors of samples, multiplying each sample with 2:
[pure~ map (*2)]
Note that in this case the object has actually two inlet/outlet pairs. The leftmost inlet/outlet pair is reserved for the processing of control messages (not used in this example), while the actual signal input and output can be found on the right.
(Pure objects can also be configured to adjust the number of inlets and outlets. This will be described later.)
The argument of [pure] and [pure~] can be any Pure expression (including local functions and variables, conditionals, etc.). We also refer to these as anonymous Pure objects. If an object is quite complicated or used several times in a patch, it is more convenient to implement it as a named object instead. To these ends, the object function is stored in a corresponding Pure script named after the object. For instance, we might put the following add function into a script named add.pure:
add x y = x+y;
Now we can use the following object in a Pd patch:
[add 5]
The Pure loader then recognizes add as an instance of the object implemented by the add.pure file and loads the script into the Pure interpreter. The creation parameter 5 is passed as the first argument x of the add function in this example, while the y argument comes from the object’s inlet. The function performed by this object is thus the same as with [pure (+5)] above.
More examples can be found in the pure-help.pd and pure~-help.pd patches. These can also be accessed in Pd by right-clicking on any Pure object and selecting the Help option. (Recent pd-pure versions also allow you to right-click and select Open to open the script of a named Pure object in a text editor, provided that your Pd version supports the menu-open command.)
In the following section, we first discuss in detail how control objects are defined and used. After that, the necessary adjustments for implementing audio objects are explained. Some advanced uses of pd-pure are described under Advanced Features.
Basically, to implement a Pd control object named foo, all you have to do is supply a Pure script named foo.pure which defines a function foo (and anything else that you might need to define the function). This function is also called the object function. You can put the script containing the object function in the same directory as the Pd patch in which you want to use the foo object, or anywhere on Pd’s search path. (The latter is useful if the object is to be used in several patches located in different subdirectories.) The script will be executed once, at the time the first object with the given name is created, and will be executed in the directory where it is located. Thus, if the script needs to import other Pure scripts or load some data files, you can put these into the same directory so that the object script can find them.
The foo function gets evaluated at object creation time, receiving any additional parameters the object is created with. The resulting Pure expression should be another function which is executed at runtime, passing Pd messages from the inlets as parameters, and routing the function results to the outlets of the object. This two-stage definition process is useful because it allows special processing (such as initialization of required data structures) to be done at object creation time. However, the result of evaluating foo can also just be foo itself if no such special processing is needed. If we need to distinguish these two stages, we also call the two functions the creation and the runtime function of the object, respectively.
Pd messages are translated to corresponding Pure expressions and vice versa in a straightforward fashion. Special support is provided for converting between the natural Pd and Pure representations of floating point numbers, symbols and lists. The following table summarizes the available conversions.
| Message Type | Pd | Pure |
|---|---|---|
| symbol | foo | foo |
| string | a&b | "a&b" |
| float | float 1.23 | 1.23 |
| list | list 1 2 3 | [1.0,2.0,3.0] |
| other | foo a 2 3 | foo a 2.0 3.0 |
Note that Pd symbols which are no valid Pure symbols become strings in Pure. Conversely, both symbols and strings in Pure are mapped to corresponding Pd symbols. Pure (machine) integers and floating point values both become float messages in Pd. Pd list messages are translated to Pure list values, while other aggregate messages are mapped to Pure applications (and vice versa).
By default, a Pure object has just one inlet and one outlet and thus acts like a simple function with no internal state. For instance, the following object accepts Pd float messages and adds 5 to each received value:
add5 x = x+5;
In the Pd patch each [add5] object then has a single inlet supplying parameters and a single outlet for results of the add5 function.
You can parameterize an object with creation arguments, which are passed to the Pure function at object creation time. For instance:
add x y = x+y;
This object can then be invoked, e.g., as [add 5] in the Pd patch to supply the needed creation argument x.
For simple kinds of objects like the above, the Pure loader provides the generic [pure] object as a quick means to create Pure control objects without actually preparing a script file. The creation parameter of [pure] is the object function. This can be a predefined Pure function, or you can define it on the fly in a with clause. (It is also possible to explicitly load additional script files needed to implement objects defined using [pure]; see Controlling the Runtime for details.)
For instance, [pure succ] uses the predefined Pure function succ which adds 1 to its input, while the object [pure add 5 with add x y = x+y end] produces the same results as the [add 5] object defined using a separate add.pure script in the previous section. You can also generate constant values that way. E.g., the object [pure cst 1.618] responds to any message (such as bang) by producing the constant value 1.618, while the object [pure cst [1..10]] yields the constant list containing the numbers 1..10.
To create an object with multiple inlets and outlets for control messages, the object creation function must return the desired numbers of inlets and outlets, along with a second function to be applied at runtime, as a tuple n,m,foo. The input arguments to the runtime function as well as the corresponding function results are then encoded as pairs k,val where k denotes the inlet or outlet index. (Note that the k index is provided only if there actually is more than one inlet. Also, the outlet index is assumed to be zero if none is specified, so that it can be omitted if there’s only one outlet.)
For instance, the following object, invoked as [cross] in the Pd patch, has two inlets and two outlets and routes messages from the left inlet to the right outlet and vice versa:
cross = 2,2,cross with cross (k,x) = (1-k,x) end;
You can also emit multiple messages, possibly to different outlets, in one go. These must be encoded as Pure vectors (or matrices) of values or index,value pairs, which are emitted in the order in which they are written. E.g., the following [fan] object implements an “n-fan” which routes its input to n outlets simultaneously:
fan n = 1,n,fan with fan x = reverse {k,x | k = 0..n-1} end;
(Note that, because of the use of reverse, the n outlets are served in right-to-left order here. This is not strictly necessary, but matches the Pd convention.)
Another example is the following [dup] object with a single inlet and outlet, which just sends out each received message twice:
dup x = {x,x};
Note that this is different from the following, which outputs a list value to the outlet instead:
dup2 x = [x,x];
(Also, please note that this behaviour is new in pd-pure 0.14. Previously, a list return value by itself would output multiple values instead. However, this made it very awkward to deal with Pd list values in pd-pure, and so as of pd-pure 0.14 Pure matrices must now be used to output multiple values.)
An object can also just “swallow” messages and generate no output at all. To these ends, make the object return either an empty vector {} or the empty tuple (). (Note that, in contrast, returning the empty list [] does send a value back to Pd, namely an empty list value.) For instance, the following object [echo] implements a sink which just prints received messages on standard output, which is useful for debugging purposes:
using system;
echo x = () when puts (str x) end;
You could also implement this object as follows, by just removing the superflous outlet (in this case all return values from the function will be ignored anyway):
using system;
echo = 1,0,puts.str;
Local state can be kept in Pure reference values. For instance, the following [counter] object produces the next counter value when receiving a bang message:
nonfix bang;
counter = next (ref 0) with
next r bang = put r (get r+1);
next _ _ = () otherwise;
end;
Note that the state is kept as an additional first parameter to the local function next here. Alternatively, you can also make the state a local variable of counter:
nonfix bang;
counter = next with
next bang = put r (get r+1);
next _ = () otherwise;
end when r = ref 0 end;
If the name of a Pure object (i.e., the basename of the corresponding Pure script) ends with the ~ character, pd-pure assumes that it denotes an audio object whose primary purpose is to process sample data. The basic setup is similar to the case of control objects, with the following differences:
Whenever Pd has audio processing enabled, the object function is invoked with one block of sample data for each iteration of Pd’s audio loop. The sample data is encoded as a double matrix which has one row for each signal inlet of the object; row 0 holds the sample data for the first signal inlet, row 1 the sample data for the second signal inlet, etc. The row size corresponds to Pd’s block size which indicates how many samples per signal connection is processed in one go for each iteration of the audio loop. (Usually the default block size is 64, but this can be changed with Pd’s -blocksize option and also on a per-window basis using the block~ object, see the Pd documentation for details.) Note that the input matrix will have zero rows if the object has zero signal inlets, in which case the row size of the matrix (as reported by the dim function) still indicates the block size.
When invoked with a signal matrix as argument, the object function should return another double matrix with the resulting sample data for the signal outlets of the object, which normally has one row per outlet and the same row size as the input matrix. (A lack or surplus of samples in the output matrix is handled gracefully, however. Missing samples are filled with zeros, while extra samples are silently ignored.)
For instance, here’s a simple object with the default single signal inlet/outlet pair (in addition to the leftmost control inlet/outlet pair, which isn’t used in this example). This object just multiplies its input signal by 2:
mul2_dsp x::matrix = map (*2) x;
This code would then be placed into a script file named mul2~.dsp and invoked in Pd as an object of the form [mul2~].
As with control objects, there’s a shortcut to create simple objects like these without preparing a script file, using the built-in [pure~] object. Thus the dsp function in the previous example could also be implemented using an object of the form [pure~ map (*2)] (which uses the same function, albeit in curried form).
Creation parameters can also be used in the same way as with control objects. The following object is to be invoked in Pd as [mul~ f] where f is the desired gain factor.
mul_dsp f::double x::matrix = map (*f) x;
Next, let’s try a custom number of signal inlets and outlets. The following object has two signal inlets and one signal outlet. Like Pd’s built-in [*~] object, it multiplies the two input signals, producing an amplitude (or ring) modulation effect:
sigmul_dsp = 2,1,sigmul with
sigmul x::matrix = zipwith (*) (row x 0) (row x 1);
end;
Here’s another example which takes no inputs and produces one output signal, a random wave (i.e., white noise). Note the use of the dim function to determine the number of samples to be generated for each block.
extern double genrand_real1() = random1;
randomwave1_dsp = 0,1,randomwave with
randomwave in::matrix = {random | i=1..n} when _,n = dim in end;
random = random1*2-1;
end;
Control messages for the control outlet of the object may be added by returning a pair sig,msg where sig is the output signal matrix and msg is a single control message or vector of such messages (using the same format as with control objects). The signal matrix can also be omitted if no signal output is needed (unless the control data takes the form of a double matrix, which would be interpreted as signal data; in such a case you’d have to specify an empty signal matrix instead). The object function may also return () if neither signal nor control output is required. (This may be the case, e.g., for dsps which just analyze the incoming signal data and store the results somewhere for later retrieval.)
Audio objects can also process control messages and generate responses on the leftmost inlet/outlet pair as usual. This is commonly used to set and retrieve various control parameters used or generated by the audio processing part of the object.
For instance, here is an audio object which plays back a soundfile using the sndfile module (cf. pure-audio). The object function reads the entire file (whose name is passed as a creation argument) at creation time and turns over processing to the playsf function which returns one block of samples from the file (along with the current position of the playback pointer) for each invocation with an (empty) input matrix. In addition, a bang message is output when the end of the file is reached. The object also responds to floating point values in the range from 0 to 1 on the control inlet by adjusting the playback pointer accordingly.
using sndfile;
nonfix bang;
playsf_dsp name = 0,nchannels,playsf with
// Play one block of samples. Also output a number in the range 0..1 on the
// control outlet to indicate the current position.
playsf x::matrix = block,get pos/nsamples when
_,n = dim x; block = submat buf (0,get pos) (nchannels,n);
put pos (get pos+n);
end if get pos>=0 && get pos<=nsamples;
// Output a bang once to indicate that we're done.
playsf x::matrix = bang when
_,n = dim x; put pos (-1);
end if get pos>=0;
playsf _::matrix = ();
// A number in the range 0..1 places the playback pointer accordingly.
playsf x::double = put pos $ int $ round $ x*nsamples $$ ();
end when
// Open the audio file for reading.
info = sf_info (); sf = sf_open name SFM_READ info;
// Get some information about the file.
nsamples,rate,nchannels,_ = sf_get_info info;
nsamples = int nsamples;
// Read the file into memory.
buf = dmatrix (nsamples,nchannels);
nsamples = int $ sf_readf_double sf buf nsamples;
// Convert interleaved samples (nsamples x nchannels) to one channel per row
// (nchannels x nsamples).
buf = transpose buf;
// Initialize the playback pointer:
pos = ref 0;
end;
As another example, here’s a complete stereo amplifier stage with bass, treble, gain and balance controls and a dB meter. The dsp part is implemented in Faust, Grame’s functional dsp programming language. The Pure program just does the necessary interfacing to Pd, which includes processing of incoming control messages for setting the control parameters of the Faust dsp, and the generation of output control messages to send the dB meter values (also computed in the Faust dsp) to Pd. (To run this example, you need the “faust2” branch of the Faust compiler so that the dsp can be inlined into the Pure program. Note that the entire section inside the %< %> braces is Faust code.)
%< -*- dsp:amp -*-
import("math.lib");
import("music.lib");
/* Fixed bass and treble frequencies. You might want to tune these for your
setup. */
bass_freq = 300;
treble_freq = 1200;
/* Bass and treble gain controls in dB. The range of +/-20 corresponds to a
boost/cut factor of 10. */
bass_gain = nentry("bass", 0, -20, 20, 0.1);
treble_gain = nentry("treble", 0, -20, 20, 0.1);
/* Gain and balance controls. */
gain = db2linear(nentry("gain", 0, -96, 96, 0.1));
bal = hslider("balance", 0, -1, 1, 0.001);
/* Balance a stereo signal by attenuating the left channel if balance is on
the right and vice versa. I found that a linear control works best here. */
balance = *(1-max(0,bal)), *(1-max(0,0-bal));
/* Generic biquad filter. */
filter(b0,b1,b2,a0,a1,a2) = f : (+ ~ g)
with {
f(x) = (b0/a0)*x+(b1/a0)*x'+(b2/a0)*x'';
g(y) = 0-(a1/a0)*y-(a2/a0)*y';
};
/* Low and high shelf filters, straight from Robert Bristow-Johnson's "Audio
EQ Cookbook", see http://www.musicdsp.org/files/Audio-EQ-Cookbook.txt. f0
is the shelf midpoint frequency, g the desired gain in dB. S is the shelf
slope parameter, we always set that to 1 here. */
low_shelf(f0,g) = filter(b0,b1,b2,a0,a1,a2)
with {
S = 1;
A = pow(10,g/40);
w0 = 2*PI*f0/SR;
alpha = sin(w0)/2 * sqrt( (A + 1/A)*(1/S - 1) + 2 );
b0 = A*( (A+1) - (A-1)*cos(w0) + 2*sqrt(A)*alpha );
b1 = 2*A*( (A-1) - (A+1)*cos(w0) );
b2 = A*( (A+1) - (A-1)*cos(w0) - 2*sqrt(A)*alpha );
a0 = (A+1) + (A-1)*cos(w0) + 2*sqrt(A)*alpha;
a1 = -2*( (A-1) + (A+1)*cos(w0) );
a2 = (A+1) + (A-1)*cos(w0) - 2*sqrt(A)*alpha;
};
high_shelf(f0,g) = filter(b0,b1,b2,a0,a1,a2)
with {
S = 1;
A = pow(10,g/40);
w0 = 2*PI*f0/SR;
alpha = sin(w0)/2 * sqrt( (A + 1/A)*(1/S - 1) + 2 );
b0 = A*( (A+1) + (A-1)*cos(w0) + 2*sqrt(A)*alpha );
b1 = -2*A*( (A-1) + (A+1)*cos(w0) );
b2 = A*( (A+1) + (A-1)*cos(w0) - 2*sqrt(A)*alpha );
a0 = (A+1) - (A-1)*cos(w0) + 2*sqrt(A)*alpha;
a1 = 2*( (A-1) - (A+1)*cos(w0) );
a2 = (A+1) - (A-1)*cos(w0) - 2*sqrt(A)*alpha;
};
/* The tone control. We simply run a low and a high shelf in series here. */
tone = low_shelf(bass_freq,bass_gain)
: high_shelf(treble_freq,treble_gain);
/* Envelop follower. This is basically a 1 pole LP with configurable attack/
release time. The result is converted to dB. You have to set the desired
attack/release time in seconds using the t parameter below. */
t = 0.1; // attack/release time in seconds
g = exp(-1/(SR*t)); // corresponding gain factor
env = abs : *(1-g) : + ~ *(g) : linear2db;
/* Use this if you want the RMS instead. Note that this doesn't really
calculate an RMS value (you'd need an FIR for that), but in practice our
simple 1 pole IIR filter works just as well. */
rms = sqr : *(1-g) : + ~ *(g) : sqrt : linear2db;
sqr(x) = x*x;
/* The dB meters for left and right channel. These are passive controls. */
left_meter(x) = attach(x, env(x) : hbargraph("left", -96, 10));
right_meter(x) = attach(x, env(x) : hbargraph("right", -96, 10));
/* The main program of the Faust dsp. */
process = (tone, tone) : (_*gain, _*gain) : balance
: (left_meter, right_meter);
%>
// These are provided by the Pd runtime.
extern float sys_getsr(), int sys_getblksize();
// Provide some reasonable default values in case the above are missing.
sys_getsr = 48000; sys_getblksize = 64;
// Get Pd's default sample rate and block size.
const SR = int sys_getsr;
const n = sys_getblksize;
using faustui;
amp_dsp = k,l,amp with
// The dsp part. This also outputs the left and right dbmeter values for
// each processed block of samples on the control outlet, using messages of
// the form left <value> and right <value>, respectively.
amp in::matrix = amp::compute dsp n in out $$
out,{left (get_control left_meter),right (get_control right_meter)};
// Respond to control messages of the form <control> <value>. <control> may
// be any of the input controls supported by the Faust program (bass,
// treble, gain, etc.).
amp (c@_ x::double) = put_control (ui!str c) x $$ x;
end when
// Initialize the dsp.
dsp = amp::newinit SR;
// Get the number of inputs and outputs and the control variables.
k,l,ui = amp::info dsp;
ui = control_map $ controls ui;
{left_meter,right_meter} = ui!!["left","right"];
// Create a buffer large enough to hold the output from the dsp.
out = dmatrix (l,n);
end;
Note that it is possible to load the above Faust program directly in Pd, using the facilities described in faust2pd: Pd Patch Generator for Faust. This is also more efficient since it avoids the overhead of the extra Pure layer. However, invoking Faust dsps via Pure also offers some benefits. In particular, it enables you to add more sophisticated control processing, interface to other 3rd party software for additional pre- and postprocessing of the signal data, or do live editing of Faust programs using the facilities described in Livecoding below.
This section discusses some advanced features of the Pd Pure loader. It explains the use of timer callbacks, wireless connections and wave arrays, and the livecoding and interactive control facilities. We also give an overview of the API provided for pd-pure programmers.
pd-pure provides a simple asynchronous messaging facility which allows a Pure object to schedule a message to be delivered to itself later. This is useful for implementing all kinds of delays and, more generally, any kind of object which, once triggered, does its own sequencing of control messages.
To these ends, the object function may return a special message of the form pd_delay t msg (either by itself or as an element of a result list) to indicate that the message msg should be delivered to the object function after t milliseconds (where t is either a machine int or a double value). After the prescribed delay the object function will then be invoked on the given message, and the results of this call are processed as usual (routing messages to outlets and/or scheduling new timer events in response to further pd_delay messages). Note that if the delay is zero or negative, the message is scheduled to be delivered immediately.
For instance, a simple kind of delay object can be implemented in Pure as follows:
mydelay _ (alarm msg) = msg;
mydelay t msg = pd_delay t (alarm msg) otherwise;
The desired delay time is specified as a creation argument. The first equation handles messages of the form alarm msg; the action is to just output the delayed message given by the msg argument. All other input messages are scheduled by the second equation, which wraps the message in an alarm term so that it gets processed by the first equation when it is delivered.
Note that pd-pure only allows you to schedule a single asynchronous event per call of the object function. Thus, if the mydelay object above receives another message while it is still waiting for the previous one to be delivered, the old timer is cancelled and the new one is scheduled instead; this works like Pd’s builtin delay object.
Moreover, scheduling a new event at an infinite (or nan) time value cancels any existing timer. (Note that you still have to specify the msg parameter, but it will be ignored in this case.) We can use this to equip our mydelay object with a stop message as follows:
nonfix stop;
mydelay _ (alarm msg) = msg;
mydelay _ stop = pd_delay inf ();
mydelay t msg = pd_delay t (alarm msg) otherwise;
More elaborate functionality can be built on top of the basic timer facility. The following example shows how to maintain a timed message queue in a Pure list, in order to implement a simple delay line similar to Pd’s builtin pipe object. Here we also employ the pd_time() function, which is provided by the Pure loader so that Pure scripts can access the current logical Pd time in milliseconds (see Programming Interface below). This is convenient if we need to deal with absolute time values, which we use in this example to keep track of the times at which messages in the queue are to be delivered:
extern double pd_time();
mypipe t = process (ref []) with
process q () = case dequeue q of
x,(t,_):_ = {x,pd_delay (t-pd_time) ()};
x,_ = x;
end;
process q x = enqueue q x $$ pd_delay t () if null (get q);
= enqueue q x $$ () otherwise;
enqueue q x = put q $ get q+[(pd_time+t,x)];
dequeue q = x,put q xs when (_,x):xs = get q end;
end;
As of version 0.14, pd-pure offers some facilities for sending and receiving messages directly, without any wired connections to the inlets and outlets of an object (similar to what the Pd [send] and [receive] objects provide). See the description for the pd_send() and pd_receive() routines in the Programming Interface section.
For instance, here’s how you can use the pd_send function to send messages to the Pd runtime:
pd_send "pd" (dsp 1); // turn on audio processing
This function also enables you to perform dynamic patching, by sending the appropriate messages to patches (i.e., "pd-patch" receivers, where patch is the name of the target patch). Useful messages to patches are listed in the Tips and Tricks section on the Pd community website, and some examples can be found here. For instance, the following Pure object, when banged, inserts a few objects into a subpatch named test and connects them to each other:
extern void pd_send(char*, expr*);
pd_send_test _ = () when
pd_send "pd-test" (obj 10 0 "osc~" 220);
pd_send "pd-test" (obj 10 30 "*~" 0.1);
pd_send "pd-test" (obj 10 60 "dac~");
pd_send "pd-test" (connect 0 0 1 0);
pd_send "pd-test" (connect 1 0 2 0);
pd_send "pd-test" (connect 1 0 2 1);
end;
An object can also receive messages from any named source by means of the pd_receive function. This function must be called either at object creation time or when one of the dsp or control processing methods of the object is invoked. For instance, the following object calls pd_receive at creation time in order to receive messages sent to the left and right receivers, and outputs them on its left or right outlet, respectively:
extern void pd_receive(char*);
pd_receive_test = 1,2,process with
process (left x) = 0,x;
process (right x) = 1,x;
end when
do pd_receive ["left","right"];
end;
Please note that pd_receive itself doesn’t return any message, it merely registers a receiver symbol so that messages sent to that symbol may be received later. The received messages are always delivered to the leftmost inlet when Pd does its control processing. Moreover, the symbol identifying the source of the message is applied to the message itself, so that the receiver can figure out where the message came from and adjust accordingly. This operation is useful, in particular, to provide communication channels between Pd GUI elements and Pure objects. Wireless connections are often preferred in such cases, to reduce display clutter.
Besides the realtime processing of audio data, Pd also provides a means to store sample data in arrays which can be displayed in a patch and modified interactively, see the section on numeric arrays in the Pd documentation for details. Arrays can be used, e.g., as running waveform displays, as wavetables which are played back in the audio loop, or as waveshaping functions used to implement distortion effects.
Each array has a name (Pd symbol) under which it can be accessed from Pure code. pd-pure makes it possible to transfer audio data directly between Pd arrays and Pure double vectors by means of the pd_getbuffer() and pd_setbuffer() routines. Please see Programming Interface below for a closer description of the provided routines.
For instance, here is a randomwave object which fills a Pd array (whose name is given as the creation argument) with random values in response to a bang message:
extern double genrand_real1() = random1;
extern int pd_getbuffersize(char *name);
extern void pd_setbuffer(char *name, expr *x);
nonfix bang;
randomwave name = 1,0,process with
process bang = pd_setbuffer name {random | i = 1..nsamples};
nsamples = pd_getbuffersize name;
random = random1*2-1;
end;
pd-pure provides a predefined [pure-runtime] object which makes it possible to control the embedded Pure interpreter in some ways. There can be any number of [pure-runtime] objects in a patch, which all refer to the same instance of the Pure interpreter.
The first use of [pure-runtime] is to load additional Pure scripts. To these ends, [pure-runtime] can be invoked with the names of scripts to be loaded at object creation time as arguments. The script names should be specified without the .pure suffix; it will be added automatically. The scripts will be searched for in the directory of the patch containing the [pure-runtime] object and on the Pd path. For instance, to load the scripts foo.pure and bar.pure, you can add the following object to your patch:
[pure-runtime foo bar]
This facility can be used, e.g., to load any additional scripts needed for anonymous objects defined with [pure] and [pure~].
Note
You’ll have to make sure that the [pure-runtime] object is inserted into the patch before any anonymous objects which depend on the loaded scripts. Also note that you shouldn’t explicitly load the scripts which implement named Pure objects; this will be handled automatically by the Pure loader.
The [pure-runtime] object also accepts control messages which can be used to dynamically reload all loaded scripts, and to implement “remote control” of a patch using the pdsend program. This is described in the following subsection.
Livecoding means changing Pure objects on the fly while a patch is running. A simple, but limited way to do this is to just edit the boxes containing Pure objects interactively, as you can do with any kind of Pd object. In this case, the changes take effect immediately after you finish editing a box. However, for more elaborate changes, you may have to edit the underlying Pure scripts and notify the Pure interpreter so that it reloads the scripts. The Pure loader provides the special [pure-runtime] object to do this.
Sending a bang to the [pure-runtime] object tells the plugin to reload all object scripts and update the Pure objects in your patch accordingly. The object also provides two outlets to deal with the inevitable latencies caused by the compilation process. The right outlet is banged when the compilation starts and the left outlet gets a bang when the compilation is finished, so that a patch using this facility can respond to these events in the appropriate way (e.g., disabling output during compilation).
The reload message works similarly, but while the bang message only reloads the object scripts, reload restarts the Pure interpreter from scratch and reloads everything, including the prelude and imported modules. This will usually take much longer, but is only necessary if you edited imported library modules which won’t be reloaded with the bang message.
While this facility is very useful for interactive development, it does have some limitations:
Also note that the reloading of object scripts amounts to a “cold restart” of the Pure objects in your patches. If a Pure object keeps some local state, it will be lost. As a remedy, the loader implements a simple protocol which allows Pure objects to record their internal state before a script gets reloaded, and restore it afterwards. To these ends, a Pure object may respond to the following two messages:
In order to participate in the pd_save/pd_restore protocol, an object must subscribe to it. This is done by setting pd_save as a sentry on the object function (see the description of the sentry function in the Pure Library Manual for details). For instance, here’s the counter example from Local State again, with the necessary additions to support the pd_save/pd_restore protocol:
nonfix bang pd_save;
counter = sentry pd_save $ next (ref 0) with
next r bang = put r (get r+1);
next r pd_save = get r;
next r (pd_restore n) = put r n;
next _ _ = () otherwise;
end;
The distribution also includes an abstraction pure-remote.pd which you can include in your patch to enable live coding, as well as remote control of the patch through the pdsend program. Sending a bang (or reload) causes a reload of the object scripts, as described above. This can also be triggered directly by clicking the bang control of the abstraction. The bang control also provides visual feedback indicating whether the compilation is still in progress. Messages are routed through the embedded [pure-runtime] object using the single inlet and the two outlets of the abstraction, so that pure-remote can also be controlled from within the patch itself.
For added convenience, the [pure-runtime] and [pure-remote] objects also accept any other message of the form receiver message and will route the given message to the given receiver. This is intended to provide remote control of various parameters in patches. For instance, by having pdsend send a play 0 or play 1 message, one might implement a simple playback control, provided that your patch includes an appropriate receiver (often a GUI object). See the pure-help.pd patch for an example.
To make these features available in emacs, there’s an accompanying elisp program (pure-remote.el) which contains some convenient keybindings for the necessary pdsend invocations, so that you can operate the pure-remote patch with simple keystrokes directly from the text editor. The same bindings are also available in Emacs Pure mode, but need to be enabled before you can use them; please see the pure-remote.el file for details. As shipped, pure-remote.el and Pure mode implement the following commands:
| C-C C-X | Quick Reload | Sends a bang message to reload object scripts. |
| C-C M-X | Full Reload | Sends a reload message to reload everything. |
| C-C C-M | Message | Prompts for a message and sends it to pure-remote. |
| C-C C-S | Play | Sends a play 1 message. |
| C-C C-T | Stop | Sends a play 0 message. |
| C-C C-G | Restart | Sends a play 0 message followed by play 1. |
| C-/ | Dsp On | Sends a pd dsp 1 (enable audio processing). |
| C-. | Dsp Off | Sends a pd dsp 0 (disable audio processing). |
Of course you can easily add more like these, just have a look at how the keybindings are implemented in pure-remote.el or pure-mode.el and create your own in an analogous fashion. Together with Pure mode, this gives you a nice interactive environment for developing pd-pure applications.
pd-pure’s livecoding abilities require that objects are run from source code. As already mentioned, this needs some (in some cases, substantial) time at startup when the Pure interpreter is loaded and your Pure scripts are compiled to native code on the fly. This is wasted effort if you are finished developing your Pure objects and just want to run them as they are.
Therefore pd-pure also supports compiling a collection of Pure objects to a binary which can be loaded with Pd’s -lib option just like any other external library of Pd objects. This basically involves using the Pure interpreter as a batch compiler to translate the Pure scripts implementing the objects to a shared library. You also have to link in a small amount of C code so that the shared module can be loaded by Pd and registers its Pd object classes with pd-pure. The examples/lib folder contains a complete example showing how this is done.
Note that even if you load all your pd-pure objects from such libraries, you still need to load the pd-pure module first, since it provides the basic infrastructure required to run any kind of pd-pure object (no matter whether it’s implemented in compiled or source form).
The Pure loader provides a number of interface routines which can be called by Pure scripts running in the Pd environment. Note that in order to access these functions, you’ll have to add the corresponding extern declarations to your scripts.
Returns the Pd version number as a string. Note that this routine will only be available when a script is running inside Pd, so you can quickly check if that’s the case as follows:
let ok = stringp $ eval "extern char *pd_version_s(); pd_version_s;";
The ok variable will then be true iff the script is running inside Pd.
Returns the Pd path (set in Pd’s Path dialog or via the -path command line option) as a list of directory names. This is useful if your Pure scripts need to locate files on the Pd search path.
Returns the Pd library dir (as determined at compile time). This is useful if your Pure scripts need to access files in that directory.
Returns the directory of the patch the current object is in. This is useful if a Pure object needs to access files in the patch directory. Please note that this function must be called during object creation or in the method calls of an object, so that it is clear what the current object is; otherwise the function will fail. Also note that the results may differ for different instances of the same object class, depending on which patches the objects are located in.
Returns the name of the file that will be opened with the menu-open action (accessible by right-clicking on a Pure object and selecting Open). This is usually the Pure script of the object, if available, but this can be changed with pd_setfile() below. The function must be called during object creation or in the method calls of an object, so that it is clear what the current object is; otherwise the function will fail.
Sets the name of the file to be opened with the menu-open action. By default, this is the Pure script of the object, if available; this function can be used to change the name of the file on a per-object basis. The function must be called during object creation or in the method calls of an object, so that it is clear what the current object is; otherwise the function will have no effect.
Posts a message in the Pd main window. A trailing newline is added automatically. This is a convenience function which is equivalent to calling Pd’s post() (which is a varargs function) as post "%s" s.
Like pd_post(), but prints an error message instead. If this routine is invoked from an object (i.e., during object creation or a method call) then Pd’s pd_error() function is called, which allows the object to be tracked down with Pd’s Find Last Error menu command. Otherwise (i.e., if the function is called at load time) Pd’s error() function is called which just outputs the message.
Retrieves the current Pd time as a double value in milliseconds, which is useful, in particular, when used in conjunction with the asynchronous message facility described under Asynchronous Messages.
Sends a message, specified as a Pure term x, to the receiver given by the symbol sym (specified as a string). This is a no-op if the receiver doesn’t exist.
Prepares an object so that it can receive messages sent to the given symbol sym. This function must be called during object creation or method calls. It can be called for different symbols, as many times as needed. The messages are always delivered to the leftmost inlet, and the given symbol is applied to the original message, so that the receiver can figure out where the message came from.
Switches off receiving messages for the given symbol sym. Use this to undo the effects of a previous pd_receive call.
Routines to access the Pd array (sample buffer) with the given name. These functions can be used to transfer audio data between Pd and Pure scripts; see Reading and Writing Audio Data above for an example.
pd_getbuffersize() and pd_setbuffersize() gets or sets the size of the given buffer, respectively.
pd_getbuffer() reads the contents of the buffer and returns it as a Pure vector (or fails if the array with the given name doesn’t exist).
pd_setbuffer() sets the contents of the buffer from the given Pure vector x. If the size of the vector exceeds the size of the buffer, the former is truncated. Conversely, if the size of the buffer exceeds the size of the Pure vector, the trailing samples are unaffected. Note: The second argument of pd_setbuffer() can also be a pair (i,x) denoting an offset i into the array at which the sample data is to be written, so that this routine allows you to overwrite any part of the array.